Product Description

16IR 22ER 5 Pitch 4 8 Acme Threading Carbide Insert Internal Vertical Lathe Cutting Tool

Quick Detail:

• Good process performance
• Stable processing
• Anti collapse and abrasion resistance
• Sharp blade
• Strong universality

Description:

• The threading carbide lathe insert is made of stainless steel, steel parts, cast iron and common cemented carbide raw materials. It is imported from Germany and has the characteristics of higher hardness, sharp edge, high finish, good toughness, less anti burr, high temperature resistance, etc., which is suitable for different working conditions; With the new layer technology and special design of surface patterns, the blade is sharp and the chip is discharged smoothly. The unique design of the polishing blade makes the blade more durable and has higher processing finish.

Specifications:​

Lead Time:

Notice:

• The threading tungsten carbide lathe insert shall not be collided or dropped on the ground and must be handled with care.
• Before installing the tungsten carbide lathe insert, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide lathe insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the tungsten carbide lathe insert is not used, hang the blade vertically on the dry shelf.

Applications:

Our tungsten carbide lathe insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: