DNMG Turning Tool Inserts DNMG 150612 Double Color Coating DNMG 150608
|Place of Origin:
Payment & Shipping Terms:
|Minimum Order Quantity:
|7 work days
|T/T, Western Union
|DNMG Turning Tools Insert
|Cnc Lathe Tool
|Cnc Lathe Machine
DNMG Turning Tool Inserts,
DNMG 150612 Turning Tool Inserts,
Double Color Coating DNMG Inserts
Turning Tools Insert DNMG150612 Double Color Coating DNMG150608
- High durability
- Fine cutting
- High speed cutting
- Wear-resistant and durable
- High finish
- Tungsten carbide insert DNMG is made of heat-resistant cobalt-rich gradient cemented carbide matrix, which ensures high stability of cutting edge, high temperature resistance, thermal shock resistance, good oxidation resistance, high-speed machining without cutting fluid, and more convenient to use; The unique groove design can make the chip removal faster and smoother, thus ensuring that the chip removal objects will not hang on the product surface; The blade is sharp and thick, thus realizing the processing state of fast cutting speed but not easy to break.
|CNC Lathe Tool
|Tungsten Carbide Turning Inserts
|High speed cutting
|Wear-resistant and durable
1.The tungsten carbide inserts shall not be collided or dropped on the ground and must be handled with care.
2.Before installing the carbide blade, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
3.After installation, it is necessary to confirm whether the central hole of the carbide blade is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
4.When using, do not exceed the specified high speed
5.When the tungsten carbide inserts is not used, hang the blade vertically on the dry shelf.
Our tungsten carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: